利用碳钢铸坯组织灰度图获取C含量分布的方法

摘要：基于热酸洗腐蚀原理与图像光学理论，提出运用金属低倍组织灰度分析技术（灰度分析法）获取中高碳钢铸坯的低倍组织中不同位置不同区域不同尺度的一维、二维C元素含量分布。偏析严重的位置得到的C元素含量高，初始凝固的晶粒中心位置得到的C元素含量低，说明通过灰度分析法计算的C元素含量分布能与低倍组织形貌很好地对应。同时，通过电子探针与灰度分析法的测量结果对比，发现二者C元素含量的变化趋势具有很好的一致性，这验证了灰度分析法的有效性。另外，低倍组织图像整体亮度的改变不会造成由灰度分析法所测量的C元素含量发生明显改变，则表明灰度分析法对测量环境的变化具有一定的抗干扰能力，也间接说明了其可靠性。     

干熄焦锅炉炉管失效机理分析

通过对干熄焦锅炉炉管及腐蚀产物开展系统研究，提出炉管失效原因为氧化/硫腐蚀＋高温粉尘冲刷。长寿命炉管仅耐磨层发生了较为严重的氧化及硫腐蚀，而近基体层发生了轻微氧化及硫腐蚀，基体只发生了轻微氧化；短寿命炉管耐磨层、近基体层以及基体裂纹内均发生了较为严重的氧化及硫腐蚀，且存在珠光体球化、内表面产生全脱碳层等缺陷。推测短寿命炉管存在超温现象，而超温可加剧氧化及硫腐蚀反应。此外，短寿命炉管遭受了较为严重的高温粉尘冲刷，不仅可造成炉管减薄，还会导致炉管表面温度升高。因此，减少循环气体中粉尘量尤其是大颗粒，可有效减弱冲刷以及控制炉管表面温度，是提高炉管使用寿命的关键。     

Stimulation of densification during the reduction of U3O8 to UO2 by atmosphere control

A reduction process in the head-end for pyroprocessing has been adopted to avoid oxidation attack on the molybdenum crucible during sintering. The reduction process is employed to reduce U₃O₈ pellets to UO₂ prior to sintering. This allows elimination of the oxygen source, which causes oxidation attack during sintering, thereby permitting the use of a metallic crucible. However, little densification occurs due to the low reduction temperature limited by the INCONEL crucible. Consequently, the amount of material scraps from the pellets increases, thus creating an additional processing burden due to its high radioactivity. To reduce the amount of scraps, densification should be enhanced. This study suggests a simple atmospheric control strategy and clarifies its effects. With the atmospheric control, a higher bulk density and better attrition resistance were obtained in comparison to without this strategy. This can be explained in terms of O/U ratio dependent diffusion kinetics during the reduction of U₃O₈ to UO₂.     

Transparent niobate glass-ceramics for optical limiting

The construction of nonlinear optical materials featuring asymmetric transmission of light is of great technological importance for various applications, including optical switching and optical power limiting. A significant challenge is the scalable fabrication of material candidates with good photochemical stability, high optical transmittance, and excellent optical limiting performance. Here, we present a nanocrystallization avenue for constructing hybrid optical limiting materials that exhibit ultrafast and robust optical limiting performance. The experimental results show that the controllable relaxation of a niobate glass may lead to the clustering of Nb-O units and contracting of the bandgap. It results in the notable improvement in nonlinear optical properties, including the enhanced saturation irradiance (380 GW/cm²), doubly increased nonlinear coefficient, and decreased limiting threshold (200 GW/cm²). Our results suggest a promising material that exhibits promising applications for protecting eyes and sensitive components from laser-induced damage.     

Luminescent and magnetic properties of cerium-doped yttrium aluminum garnet and yttrium iron garnet composites

Functional materials exhibiting magnetic and luminescent properties have been recognized as an emerging class of materials with great potential in advanced applications. Herein, properties of multifunctional ceramic composites consisting of two garnets, luminescent cerium-doped Y₃Al₅O₁₂ (Ce:YAG) and magnetic Y₃Fe₅O₁₂ (YIG), are reported. On increasing the sintering temperature, both the photoluminescence and saturation magnetization of the Ce:YAG-YIG composites decreased gradually because of the interdiffusion of trivalent ions such as Al³⁺ and Fe³⁺. At a constant sintering temperature of 1100?°C, the YIG contents in the composites increased, thereby causing their luminescent properties to degrade and the saturation magnetizations to increase. For application to electronics, Ce:YAG-YIG composite thin films were integrated on quartz substrates by sputtering the ceramic target. The composite thin films exhibited both magnetic and luminescent properties after annealing. These techniques facilitate the incorporation of multifunctional nanocomposites into various devices.     

High-Tg porous polyimide films with low dielectric constant derived from spiro-(adamantane-2,9′(2′,7′-diamino)-fluorene)

Porous polyimide (PI) films with low dielectric constants and excellent thermal properties have been a pressing demand for the next generation of high-performance, miniature, and ultrathin microelectronic devices. A series of novel porous PI films containing fluorenyl-adamantane groups were prepared successfully via thermolysis of poly(ethylene glycol) (PEG) added in the PI matrix. The cross-sectional morphologies of porous PI films showed closed pores with diameters ranging from 135 to 158 nm, which were uniform and regular in shape without interconnectivity. These porous PI films exhibited excellent thermal properties with a glass-transition temperature at 376 °C whereas the 5% weight loss temperature in air excess of 405 °C due to enhanced rigidity afforded by fluorenyl-adamantane groups. Accompanied by thermolysis content of PEG increasing from 0 to 20 wt %, the density of porous PI films decreased, and the corresponding porosity grew significantly from 0 to 11.48%. Depending on porosity, the dielectric constant and dielectric loss of porous PI films significantly declined from 2.89 to 2.37 and from 0.050 to 0.021, respectively. These excellent properties benefit the as-prepared porous PI films for application as interlayer dielectrics, integrated circuit chips, or multichip modules in microelectronic fields. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47313.     

镁对非调质钢中组织及硫化物的影响

摘要：为了探究不同镁含量对非调质钢中组织和硫化物形态、尺寸、分布及成分的影响，采用蔡司金相显微镜、扫描电子显微镜、小样电解等方法，分析了经高温电阻炉冶炼不同镁添加量的49MnVS3非调质钢。结果表明，由于镁蒸气压较高，在实验室冶炼中大量挥发，导致钢中镁的实际平均收得率仅为310%；镁的质量分数为0～22×10-6时，随着镁的质量分数的增加，钢中硫化物形态由Ⅱ类逐渐向Ⅰ类、Ⅲ类转变；钢中硫化物尺寸增大，硫化物的分布均匀性得到显著改善；钢中复合夹杂物比例明显增加，但MnS的比例出现下降；形成了细小弥散的氧化物，增加了奥氏体形核质点，具有细化组织的趋势。     

Quantitative measurements of nanoparticle layer thicknesses near the contact line region after droplet drying-out

Journal of Mechanical Science and Technology - Confocal fringe patterns of evaporating sessile drops have provided initial evidence of the presence of a sub-micron thin liquid film emanating from...     

Simple solution-combustion synthesis of Fe2TiO5 nanomaterials with enhanced lithium storage properties

The porous Fe₂TiO₅ particles are successfully synthesized through a facile one step solution combustion method. The Fe₂TiO₅ negative materials exhibit remarkable electrochemical performance with discharge capacities of 371.4?mAh g^?1 at the 100 th cycle, and display promising rate stability with discharge capacities 76.6?mAh·g^?1 at a high current density of 3.2?A?g^?1. In addition, the mechanism of electrochemistry reaction is illustrated by the CV, raman and EIS measurements, the irreversible capacity mainly causes from the irreversible lithium insertion at 1.8?V. The results indicate that the one step solution combustion synthesis of porous Fe₂TiO₅ is a promising strategy for developing low-cost and high-performance Ti-based negative materials.